-
Abnormal Red Blood Cell Morphology
-
Abnormal White Blood Cell Morphology
-
This procedure provides instructions for referring samples to a reference laboratory
-
Factors of the intrinsic coagulation system are activated by incubating the plasma with
the optimal
amount of phospholipids and a surface activator. The addition of calcium ions triggers
the coagulation
process, and the clotting time is then measured.
-
To provide instruction for activating new lot numbers of controls in the LIS and on the
DxH 600.
-
Adding a New Glucometer to Cobas IT 1000
-
To provide instructions on how to add a new lot number of reagent to Roche Cobas
IT 1000 glucometer software
-
To provide instructions on how to add a new operator to Cobas IT 1000.
-
Standard operating procedure includes indications for use, administration of product and adverse reactions. Scope - intended for nursing and laboratory personnel.
Key word: albumin
-
The laboratory shall monitor the ambient temperature and ambient
humidity on a daily basis to ensure that they do not adversely affect
the quality of the examination results.
-
To provide instructions on how to use the Anaerogen Compact anaerobic gas generating system.
-
The Indirect Antiglobulin Test (IAT) is used to test the patient plasma against a set of screening cells of known antigen composition in order to determine if the patient has any abnormal antibodies.
Keywords: Antibody screen, indirect antiglobulin test, ABS, group and screen
-
Keywords: TM0105, Specimen Requirements, Blood Bank, Acceptable
This document provides guidance on assessing blood bank samples for testing.
-
The policy provides direction to ensure that the performance of all phases of
the laboratory path of work is assessed through the use of accepted
proficiency testing (PT) practices.
-
Perioperative autologous blood donation (PAD) is the banking of red cell units (rarely plasma) collected from a patient before a planned surgery.
Keywords: autologous
-
Prior to the implementation of new analytical methods, a series of
validation/verification procedures are completed to verify the manufacturer’s
claims.
-
-
This document provides instructions for using the Bacharach Fyrite CO2 indicator system.
-
To provide instructions for accessioning and loading blood culture bottles in the BacT Alert 3D 60 analyzer and entering a preliminary result in the Meditech system.
-
In a troubleshooting situation, it may be necessary to disable a cell or an entire rack so it is not used for patient testing. The BacT/Alert will give an error code on the cell or the rack to indicate that there has been an error detected by the system and that the cell or rack may not be used for testing.